Vintage Bone Guitar Nut Blanks

Vintage Bone Guitar Nut Blanks

Let’s keep this real simple. There are 3 size nuts for guitars:

1) 1/8″ Thick Nut Blanks for Fender Guitars.

2) Small Standard Nut Blanks. These are slightly less than 1/4″ thick and are for Gibson, Taylor and many other Guitars.

3) Large Standard Nut Blanks. These will finish at 1/4″ thickness and are for Martin Guitars and many others.

If you are uncertain if you need a small or a large then you should get a large as it will work for either one.

1/8″ Fender® Size Vintage Bone Nut Blank

Vintage Bone Guitar Nut Blank. Fender® Size.

1/8″ X .375″ X 2″ (3.2 mm X 10 mm X 51 mm)

Fender Style Vintage Bone Nut Blank for Fender® style guitars and basses.

Small Standard Vintage Bone Nut Blank 1/4″ –

Small Standard Size Vintage Bone Nut Blank.

.225″+ X .470″ X 2.2″ (5.7 mm X 12 mm X 55 mm)

Vintage Bone Nut blank to fit Gibson®, Taylor® and other guitars taking a nut that is smaller than 1/4″ thick.

Large Standard Vintage Bone Nut Blank 1/4″ +

Large Standard Size Vintage Bone Nut Blank

1/4″ X .470″ X 2.2″ (6.4 mm X 12 mm X 55mm)

To fit Martin® and other guitars requiring a 1/4″ thick guitar nut.